|
|
Serva
Model TACS-2000-980 Offshore Auto Cementing Pump Skid
|
DESCRIPTION:
The Model
TACS-2000 system is a complete mixing and pumping unit that can be
skid or trailer mounted. This unit is state-of-the-art in mixing
and automatic control. This system is designed for the most demanding
oil and gas well cementing requirements. The quality of design, component
selection, and quality manufacture makes it a benchmark in the industry.
The high energy mixing system can mix the most difficult slurries
and the
automatic density control will provided superior density control. The 20 bbl
averaging makes the operator's job easier, provides a cushion for fluctuations
in bulk delivery, and provides excellent density and additive concentration
averaging.
A. PRIMARY MIXING
and PUMP SKID
- (2) 3406TA CAT
Diesel Engine, 490 HP each*1
- (2) HT750 ALLISON
transmission
- (1) SERVApump
TPA600 X 4.0" Dia Plunger Triplex Pump (left pump)
- (1) SERVApump
TPA600 X 3.5" Dia Plunger Triplex Pump (right pump)
- (1) 7 bbl mixing
tank
- (1) 20 bbl averaging
tank (optional)
- (1) 20 bbl displacement
tank, (i.e. 2 - 10 bbl tanks)
- (2) SERVApump
5x6 centrifugal pumps (cement mixing recirculation and transfer to
triplex pumps)
- (1) 3x4 centrifugal
pump (mix water and displacement fluid)
- (1) Automatic
Control Mixier (ServaACM) for density
- (1) Fuel supply,
60 gal day tank capacity*2
- (1) Air reservoir,
40 gal
- Radiator cooling
of engines and hydraulics
B. AUXILLARY HYDRAULIC
POWER PACK
- (1) 3126T CAT
Diesel Engine, 260 HP
- (3) Closed loop
hydrostatic transmissions
- (1) Fuel capacity,
45 gal*2
- Radiator cooling
of engines and hydraulics
Notes:
1. 490 HP with mechanical fuel injection system; higher horsepower can be
obtained with electronic fuel injection.
2. If unit is permanently mounted on a trailer, then a single 200 gal fuel
tank will be provided.
SKID DEMENSIONS
and WEIGHT
A. PRIMARY MIXING
and PUMP SKID
Cementer Weight:
Gross Weight w/o Iron, dry 39,400 lb.
Weight, wet 41,000 lb. EST with lubricant and hydraulic fluids only
Base frame size: 400 mm x 58 lb/ft dual channel frame
Length, overall: 21 ft. (7315mm) (without averaging tank)
Width 101.5 in. (2578 mm)
Height 118.9 in. (3.02 m) (to top of console with cement metering valve removed
- normal for transport)
B. AUXILLARY
HYDRAULIC POWER PACK
Gross Weight, dry
= 1400 Kg (3080 lb.)
Weight, wet 1582 Kg (3480 lb.) EST with lubricant and hydraulic fluids only
Base frame size: 150 mm (5.9 in.) x 20.5 Kg/m (14.8 lb/ft) dual channel frame
Frame description: Welded construction with channel and angle structural steel.
Designed for forklift or crane lifting.
Length, overall: 98 in. (2489mm)
Width 42 in. (1067 mm)
Height 73 in. (1854 mm) with muffler
Height 62 in. (1575 mm) without muffler (minimum shipping height)
Model
TACS-2000 Double Pump Cementer Skid w/Recirculating Mixer
Mixing
Tub
Operator
Control Panel
|
